Electrolux EW7H49YB handleiding
Handleiding
Je bekijkt pagina 12 van 64
6.1 QR code on rating plate
00000000
00A
Mod.
xxxxxxxxx
000V ~ 00Hz 0000 W
910000000
00
Prod.No.
SCANNING...
QR code can be used in two ways:
• Scan the QR code with the built-in camera
app to download our app from the App
store on your smart device and follow the
required steps.
• Pairing your smart device with appliance
to simplify the process. Scan the QR code
with QR code scanner built-in our app.
6.2 Installing our app
When connecting the tumble dryer to the
application, stand near it with Your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart device
or scan QR code (
see chapter "QR code
on rating plate"
).
2. Download and install our app.
3. Start the application. Select the country
and language and login with Your email
and password. If you do not have an
account, create a new one following the
instructions in our app.
6.3 Configuring the dryer wireless
connection
Have our app downloaded and installed on
your smart device.
1. In our app - tap on Add appliance and
follow the instructions on the App for
appliance connection.
2. Press the on/off button for a few seconds
to activate the appliance.
3. Select a programme by turning the
programme dial.
4. Press and hold down Asciugatura a
Tempo and Partenza Ritardata buttons
at the same time for 3 seconds until a
'click' sounds.
The text pop up for about 5 seconds and
the icon
starts flashing and wireless
module begins starting up. It may takes about
10 seconds before it is ready. When the
wireless module is ready, the text
(Access Point) is on to inform you, that the
access point will be open for about 5 minute.
5. Configure our app on your smart device.
6. If the connectivity is configured,
(Access Point) symbol is off and the icon
will stop blinking and lit steadily to
confirm that the configuration was
successful.
Every time you switch the appliance
on, the appliance takes 10 seconds
to connect to the network
automatically. When the indicator
stops blinking the connection is
ready.
To switch the wireless connection off,
press and hold Asciugatura a Tempo and
Partenza Ritardata touch buttons for 3
seconds until the first acoustic signal:
appears on the display.
If you switch the appliance off and on
again, the wireless connection is
automatically off.
To remove the wireless credentials, press
and hold Asciugatura a Tempo and
Partenza Ritardata touch buttons for 10
seconds until the second acoustic signal:
appears on the display.
12 ENGLISH
Bekijk gratis de handleiding van Electrolux EW7H49YB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7H49YB |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5813 MB |
