Electrolux EW7H39B handleiding
Handleiding
Je bekijkt pagina 16 van 56
If a draining kit is installed (additional
accessory), the appliance automatically
drains the water from the water
container. In this case we recommend
that you deactivate the indicator of the
water container.
Deactivating the water container
indicator:
1. Press the on/off button to activate the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold touch buttons (H) and (G)
at the same time. The display shows "Off"
and the water container indicator is
deactivated. After 5 s the display returns
to normal mode.
To activate the water container indicator
back, follow the procedure above again.
The display shows "On" and the water
container indicator is activated.
8.3 Buzzer permanent off
To deactivate or activate the acoustic signals,
press and hold for approximately 2 seconds
touchpads (D) and (C) at the same time.
8.4 Operating hours counter
This function gives a possibility to display the
total operating time of the appliance in hours,
which is counted from the moment it is first
switched on. The actual operating time of the
cycles is shown (does not include pauses or
delayed start time).
To visualise this value, proceed as follows:
1. Switch the appliance on by pressing the
On/Off button.
2. Press and hold the F and D buttons for
some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. if the operating time is 1276 hours,
the display shows the text Hr for 2
seconds then 12 for 2 seconds followed
by 76. This value is displayed with a
sequence of two digits at a time: the first
two digits indicate thousands and
hundreds, the second two digits indicate
tens and units.
To exit this mode, either press any button,
turn the selector knob or switch the appliance
off.
8.5 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
working modes will be reset. It will also
remove WiFi network credentials from the
appliance memory and reset personalized
program settings.
To activate this option follow steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Wait approximately 8 seconds.
3. Press and hold the E and D buttons for
some seconds.
4. The appliance will acknowledge the
operation by displaying
.
If the procedure does not work (this could
be due to timeout or wrong keys
combination), switch the appliance off
and repeat the sequence from the
beginning.
16 ENGLISH
Bekijk gratis de handleiding van Electrolux EW7H39B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7H39B |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5115 MB |
