Electrolux EW7H28B handleiding
Handleiding
Je bekijkt pagina 24 van 56
Problem Possible solution
Make sure that the laundry is not caught between the
appliance door and the rubber seal.
The appliance stops during operation. Make sure that the water container is empty. Press Av‐
vio/Pausa to start the programme again.
Load is too small, increase the load or use the Tempo
programme.
The cycle time is too long or unsatisfactory drying re‐
sult.
1)
Make sure that the weight of the laundry is suitable for
the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in the washing
machine again.
Ensure that the room temperature is higher than +5°C
and lower than +35°C. Optimal room temperature is
18°C to 25°C.
Set the Tempo or the Asc. Extra programme.
2)
The display shows .
If you want to set a new programme, deactivate and ac‐
tivate the appliance.
Make sure that the options are suitable for the pro‐
gramme.
1)
After maximum 5 hours, the programme ends automatically.
2)
It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor
( See chapter "
OPTIONS: Dryness Level -
Adjustment of target final moisture
" for
better setting).
• The airflow slots are clogged.
• Room temperature is too low or too high
( optimal room temperature 18°C to 25°C )
24 ENGLISH
Bekijk gratis de handleiding van Electrolux EW7H28B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7H28B |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4958 MB |
