Electrolux EW7F411CH3 handleiding
Handleiding
Je bekijkt pagina 23 van 84

11.3 Filling the detergent and
additives
Compartment for prewash phase, soak
programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives (fabric
conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always follow the instructions that you
find on the packaging of the detergent
products, but we recommend that you do
not exceed the maximum indicated level
( ). This quantity will however
guarantee the best washing results.
After a washing cycle, if necessary,
remove any detergent residue from the
detergent dispenser.
11.4 Check the position of the flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the flap
up.
4. To use liquid detergent, turn the flap
down .
With the flap in the position DOWN:
• Do not use gelatinous or thick
liquid detergents.
• Do not put more liquid detergent
than the limit shown on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
11.5 Bleach
Alternatively the softener, it is also possible to
use a bleach agent in the compartment
with the programmes for white cottons.
Proceed as follows:
1. Put the bleach in the compartment .
Do not exceed the «MAX» mark in the
detergent dispenser drawer.
2. Run a programme for white cottons.
3. At the end of the programme, run the
rinse programme or a programme with
the rinse option. Use softener, if desired.
This helps to eliminate any bleach residues.
Never pour bleach and softener into the
compartment at the same time.
11.6 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The related
programme indicator comes on.
The Eco 40-60 is the default proposed
programme when the appliance is turned on,
the one to which the information of the energy
label relates.
The indicator of the Start/Pause button
flashes.
The display shows an indicative programme
duration, the maximum declared load for the
set programme (only for a few seconds), the
default temperature, the default spin speed
and the washing phase indicators (when
available).
ENGLISH 23
Bekijk gratis de handleiding van Electrolux EW7F411CH3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Electrolux |
Model | EW7F411CH3 |
Categorie | Wasmachine |
Taal | Nederlands |
Grootte | 7756 MB |