Electrolux EW7F411B3 handleiding
Handleiding
Je bekijkt pagina 24 van 84
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators come on in the display and the
given information changes accordingly.
In case a selection is not possible an
acoustic signal sounds.
11.7 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator .
The drain pump can operate shortly
before the appliance fills water.
11.8 Starting a programme with the
delay start
1. Touch the Delay Start button repeatedly
until the display shows the desired delay
time. On the display the indicator shows
2. Touch the Start/Pause button. The
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator .
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pause button to pause
the appliance. The related indicator
flashes.
2. Touch the Delay Start button repeatedly
until the display shows and the
indicator goes off.
3. Touch the Start/Pause button again to
start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pause button to pause
the appliance. The related indicator
flashes.
2. Touch the Delay Start button repeatedly
until the display shows the desired delay
time.
3. Touch the Start/Pause button again to
start the new countdown.
11.9 The SensiCare System load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Start/Pause button, the
maximum declared load indicator goes off,
the SensiCare System starts the laundry load
detection:
1. The appliance detects the load in the first
30 seconds. In the programmes where
Time Manager is available, during this
phase the Time Manager bars
placed below the time digits play a simple
animation. The drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could increase
or decrease. After further 30 seconds, the
water filling starts.
At the end of the load detection, in case of
drum overload, the indicator
is
flashing in the display:
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The SensiCare phase can
be repeated up to three times (see point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
24 ENGLISH
Bekijk gratis de handleiding van Electrolux EW7F411B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7F411B3 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7756 MB |
