Electrolux EW7F410Y handleiding
Handleiding
Je bekijkt pagina 28 van 96
12.9 The SensiCare System load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Start/Pause button, the
maximum declared load indicator goes off,
the SensiCare System starts the laundry load
detection:
1. The appliance detects the load in the first
30 seconds. In the programmes where
Time Manager is available, during this
phase the Time Manager bars
placed below the time digits play a simple
animation. The drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could increase
or decrease. After further 30 seconds, the
water filling starts.
At the end of the load detection, in case of
drum overload, the indicator is
flashing in the display:
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The SensiCare phase can
be repeated up to three times (see point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The SensiCare detection is carried out
with complete washing programmes only
and if the programme duration has not
been reduced by means of the Time
Manager button.
The SensiCare System is not available
with all programmes such as :Wool,
Rinse and programmes with short cycles.
12.10 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause button again.
The washing programme continues.
12.11 Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the
appliance.
2. Press the On/Off button again to activate
the appliance.
Now, you can set a new washing programme.
If the SensiCare phase is already carried
out and the water filling is already
started, the new programme starts
without repeating the SensiCare
phase. The water and the detergent are
not drained out in order to avoid waste.
The display shows the maximum duration
of the programme, updating it about 20
minutes after the starting of the new
programme.
There is also an alternative way of cancelling:
1. Touch the Start/Pause button.
28 ENGLISH
Bekijk gratis de handleiding van Electrolux EW7F410Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7F410Y |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8838 MB |
