Electrolux EW6T426A handleiding
Handleiding
Je bekijkt pagina 19 van 60
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not put more liquid then the
maximum level.
• Do not set the delay start function.
9.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Avvio/Pausa button
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators illuminate on the display and
the given information changes
accordingly.
If a selection is not possible an acoustic
signal sounds and the display shows
.
9.6 Additional information about
daily use
The SensiCare System load detection
The SensiCare adjusts automatically the
programme duration to the laundry in the
drum to achieve perfect washing results in
the minimum possible time. After about 30
seconds, the water filling starts. The
SensiCare detection is carried out with
complete washing programmes only and if
the programme duration has not been
reduced.
Starting a programme
Touch the Avvio/Pausa button to start the
programme. The related indicator stops
flashing and stays on. The programme starts,
the lid is locked. The display shows the
indicator .
Starting a programme with delay start
1.Touch the Partenza Ritardata button
repeatedly until the display shows the desired
delay time.
2. Touch the Avvio/Pausa button. The
appliance lid locks and starts the countdown
of the delay start. When the countdown is
completed, the programme starts
automatically.
Interrupting a programme and changing
the options.
1.When the programme is running, you can
change only some options. Touch the Avvio/
Pausa
button.
2. Change the options. The given information
in the display changes accordingly
3. Touch the Avvio/Pausa again. The
washing programme continues.
Cancelling a running programme
• Press the button On/Off button to cancel
the programme and to deactivate the
appliance. Press again to activate the
appliance.
• Rotate the selection knob to the "reset"
position activate the appliance . Wait 2
second. Now you can set a new washing
programme.
Draining water out after end of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse you must remember to drain the water
to open the lid.
• Touch button Centrifuga to decrease the
spin speed proposed by the appliance
• Press the Avvio/Pausa
• When the programme is completed and
the lid locked indicator goes off, you
can open the lid.
• Press theOn/Off button to deactivate the
appliance.
Stand-by function
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption.
ENGLISH 19
Bekijk gratis de handleiding van Electrolux EW6T426A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW6T426A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5015 MB |
