Electrolux EW6S306BL handleiding
Handleiding
Je bekijkt pagina 23 van 84
The drain pump can operate shortly
before the appliance fills water.
11.7 Starting a programme with the
delay start
1. Touch the Partenza Ritardata button
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Avvio/Pausa button. The
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator .
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Avvio/Pausa
button to
pause the appliance. The related
indicator flashes.
2. Touch the Partenza Ritardata button
repeatedly until the display shows and
the indicator
goes off.
3. Touch the Avvio/Pausa button again
to start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Avvio/Pausa button to
pause the appliance. The related
indicator flashes.
2. Touch the Partenza Ritardata button
repeatedly until the display shows the
desired delay time.
3. Touch the Avvio/Pausa button again
to start the new countdown.
11.8 The SensiCare System load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Avvio/Pausa button, the
maximum declared load indicator goes off,
the SensiCare System starts the laundry load
detection:
1. The appliance detects the load in the first
30 seconds. In the programmes where
Time Manager is available, during this
phase the Time Manager bars
placed below the time digits play a simple
animation. The drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could increase
or decrease. After further 30 seconds, the
water filling starts.
At the end of the load detection, in case of
drum overload, the indicator is
flashing in the display:
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Avvio/Pausa button to start the
programme again. The SensiCare phase can
be repeated up to three times (see point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
ENGLISH 23
Bekijk gratis de handleiding van Electrolux EW6S306BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW6S306BL |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7660 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Buttons, Rotary, Touch |
| Kleur van het product | Zwart, zilver |
| Ingebouwd display | Ja |
| Gewicht | 58500 g |
