Electrolux EFI632V94Q handleiding
Handleiding
Je bekijkt pagina 72 van 260
9.3 Setting a programme
If you wish to change the automatic
detergent or fabric softener dosage, enter
the AutoDose configuration mode before
proceeding with any programme setting.
The configuration mode may cancel
temporary settings. Please refer to
"AutoDose configuration mode"
paragraph in "The AutoDose Technology
(Autodosing)" chapter.
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Start/Pause button
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators illuminate on the display and
the given information changes
accordingly.
If a selection is not possible an acoustic
signal sounds and the display shows
.
9.4 Additional information about
daily use
The SensiCare System load detection
The SensiCare System adjusts automatically
the programme duration to the laundry in the
drum to achieve perfect washing results in
the minimum possible time. The appliance
detects the load in the first 30 seconds. In the
programmes where Time Manager is
available, during this phase the display play a
simple animation. The drum rotates shortly.
At the end of the load detection, in case of
drum overload, the indicator
is
flashing in the display. You can pause the
appliance and remove the exceeding
garments. If not the washing programme
starts anyway. About 20 minutes after the
programme start, the programme duration
could be adjusted again depending on the
capacity of water absorption of the fabrics.
The SensiCare System is not available in
programmes with short cycles.
Starting a programme
Touch the Start/Pause button to start the
programme. The related indicator stops
flashing and stays on. The programme starts,
the door is locked. The display shows the
indicator The programme starts, the door is
locked. The display shows the indicator .
Starting a programme with delay start
1. Touch the Delay Start button repeatedly
until the display shows the desired delay
time.
2. Touch the Start/Pause button. The
appliance door locks and starts the
countdown of the delay start. When the
countdown is completed, the programme
starts automatically.
Interrupting a programme and changing
the options.
1. When the programme is running, you can
change only some options. Touch the Start/
Pause button.
2. Change the options. The given information
in the display changes accordingly
3. Touch the Start/Pause again. The
washing programme continues.
Cancelling a running programme
• Press the button On/Off button to cancel
the programme and to deactivate the
appliance. Press again to activate the
appliance.
• Rotate the selection knob to the "reset"
position activate the appliance . Wait 2
second. Now you can set a new washing
programme.
End of the programme
• The appliance stops automatically. In the
display comes on. The acoustic
signals operate (if they are active).
• The indicator of the Start/Pause button
goes off. The door locked goes off
and the door unlocks.
• Press the On/Off button for some seconds
to deactivate the appliance. Keep the door
72 ENGLISH
Bekijk gratis de handleiding van Electrolux EFI632V94Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EFI632V94Q |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 25746 MB |
