Electrolux EDSH4944SS handleiding
Handleiding
Je bekijkt pagina 9 van 28
9
CONTROLS AND SETTINGS
Opening the Door During
Operation
When the door is opened a running cycle is
paused. Once the START button is pressed
the corresponding LED stops blinking and
stays on and the CLOSE LED blinks. If the
door is not closed within 4 seconds the
START LED will blink, and a reminder tone
sounds every 30 seconds until START or
CANCEL is pressed. The tone will sound a
maximum of 5 times. If a cycle is paused the
floor indicator light stays ON until the door is
open. If the door is closed without pressing
the START button, The floor indicator light
turns off. If the cycle is paused it is not
possible to change program or options
unless the running one is canceled.
NOTE
Opening the door during normal
operation pauses the wash cycle.
NOTE
The CONTROL LOCK LED will blink three
times and then stay lit if any buttons are
pressed while control lock is active.
NOTE
If the dishwasher door is kept open for too
long, or the door is closed without pressing
the Start button, the running cycle or delay
countdown may be canceled.
To Resume a Wash
If cycle is paused, the floor indicator light
stays ON until the door is open. If the door
is closed without pressing start, the floor
indicator turns off.
Once the START button is pressed the
corresponding LED stops blinking and stays
on and the CLOSE LED blinks. If the door
is not closed within 4 seconds the START
LED will blink, and a reminder tone sounds
every 30 seconds until START or CANCEL is
pressed. The tone will sound a maximum of
5 times.
Open the door to enable the buttons, press
START and close the door within 4 seconds
to resume the wash cycle.
The control panel will go into sleep mode if
there is no interaction with the START button,
door, or other buttons for a period of 5
minutes.
Cancel a Wash
Press the CANCEL button to cancel a
running wash cycle. When a cycle is
canceled, the tub drains either on door close
within 4 seconds upon touching the CANCEL
button (to avoid soiled water sitting in the
tub) or at the beginning of the next wash.
When a wash is canceled, the tub will drain
of any water for about 1 minute during which
the LED above the CANCEL button and the
floor indicator light are lit.
Change Options After a Wash or
Delayed Wash Starts
A running wash cycle must be canceled to
reselect options for a running cycle.
NOTE
Opening the door while the dishwasher
is draining will cancel the drain cycle.
Draining will then complete before the
next wash starts.
If the newly selected wash option cannot be
selected, the LED button for that option will
blink 3 times and then turn off.
Bekijk gratis de handleiding van Electrolux EDSH4944SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EDSH4944SS |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3221 MB |
