Electrolux EDSH4944SS handleiding
Handleiding
Je bekijkt pagina 20 van 28
20
SAVING ENERGY
Energy use
The yellow energy guide label that came on
your unit tells how much energy it would use
in one year and how it compares to others
that are available. The energy is based on
the NORMAL cycle response to tests that
apply soils and dishware that simulate the
average use. Eight place settings of dishware
and some serving pieces are used during the
test. The total energy is based on running the
average number of cycles per year, applying
typical soil levels to the dishware and half
the time, selecting the option of using extra
energy to more fully dry the dishware. Actual
energy and water use will depend upon the
cycle and options you select.
This unit uses an in-line water heating
element that is located under the tub. There
is no exposed heater that plasticware might
come in contact with or that is accessible
to touch. The heat is taken to the dishware
through the heated water. For this reason,
plastic dishware may be placed where it
best fits in either the top or bottom rack.
Temperatures are uniform throughout the
dishwasher.
If the user prefers to save energy and dry
the dishes by hand they select the AIR DRY
option. If you prefer to spend slightly more
energy to get the dishes drier select one
of the heated dry options. In response the
wash and rinse temperatures in the cycle will
be increased.
This aids cleaning and also heats the
dishwasher. When all standing water is
removed in the final drain, the extra heat
stored in the dishware acts to evaporate the
remaining water.
In general, more energy is used when more
water and heat are used in a cycle. Several
cycles, such as the NORMAL cycle, change
based on soil level, options selected, and
ambient conditions. The NORMAL cycle is
good for all around use. Other cycles are
focused toward special use like the HE AVY
cycle that is designed for heavily solid
cookware.
Your unit has DishSense
TM
Technology that
works to sense how heavily soiled the
dish load is so the cycle is automatically
adjusted to the appropriate response. This
helps to prevent energy waste. The sensor
is calibrated at the end of each cycle. and
assures a clean load.
DishSense
TM
technology
NOTE
For the first cycle after power is applied
(when first installed or after a power
failure) the sensor will not be calibrated
and so cannot determine the soil load.
Therefore, the unit provides a response
suitable for heavily soiled dishes on the
first run after power is restored. Energy use
during this first run may be higher than
would be typical.
Bekijk gratis de handleiding van Electrolux EDSH4944SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EDSH4944SS |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3221 MB |
