Electrolux ECCI3068SS handleiding
Handleiding
Je bekijkt pagina 16 van 25
16
SETTING SURFACE CONTROLS
ON
OFF
MAX
POWER
Setting induction cooking zones
To operate an induction cooking zone:
1. Turn the cooktop on by pressing the Power key.
2. Place correctly sized cookware on the cooking
zone. The controls for a zone won’t activate unless
cookware is detected.
3. Press the On/Off key for the active cooking zone.
The On/Off indicator will turn red.
4. Set the cooking zone to the desired level (refer
to Table 1) by pressing the number of the desired
setting or MAX.
5. When cooking is complete, turn the induction
cooking zone OFF by pressing its On/Off key or
the Power key before removing the cookware. If all
of the zones are off , the cooktop will automatically
power off in 30 seconds.
At any time, you can change the setting for an active
cook zone by pressing the number of the new setting.
IMPORTANT
Do not leave empty cookware on an operating
cooking zone. Cookware will heat very quickly and
may be damaged or warped if left on the cooking
zone empty.
NOTE
A cooking zone will not become active without
proper cookware in position. See “Pan Sensing” on
page 11.
If the cooktop does not detect cookware within 30
seconds, it will turn off .
Suggested induction cooking zone settings
Start most cooking operations on a higher setting and
then turn to a lower setting to fi nish cooking.
The suggested settings found in Table 1 below are
based on cooking with medium-weight stainless steel
pans with lids. Settings may vary when using other
types of pans.
Electrolux Induction Recommendations
Temp
Range
Power
Level
Description
Keep Warm
145°-160°F
Low 1 Keep foods warm
Simmer 185 - 200°F
Medium
Low
2-4 Continue cooking,
poach, stew
Medium 5-6 Maintain a slow boil,
thicken sauces and
gravies, steaming,
cooking
Medium
High
7-8 Continue a rapid boil,
fry, or deep fry
High 9 Start most foods,
maintain water at a
boil, pan cooking,
searing
Maxi-
mum
MAX Start heating pans
that contain large
amounts of food or
to bring pots of water
to boil
Table 1: Suggested induction cooking zone settings
NOTE:
• The size and type of the cookware used and the
amount and type of food being cooked will infl u-
ence the setting needed for best cooking results.
• The Max setting is available after activating a
cooking zone by pressing the MAX key. The cook-
top will remain on Max for up to 10 minutes. After
10 minutes, the cooking zone will automatically
change to the high (9) setting.
• The Hot Surface indicator (Hot) will show in the
setting indicator when heat is detected in a cook
zone that has been turned off . The indicator will re-
main on until the heated surface area has cooled
suffi ciently.
Figure 16: Induction cooking zone control
Bekijk gratis de handleiding van Electrolux ECCI3068SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | ECCI3068SS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2399 MB |
