Electrolux DE-650S handleiding
Handleiding
Je bekijkt pagina 28 van 48
28
Installation manual
5.6 Adjusting the air flow
Adjusting the air flow may only be carried out by authorized personnel.
For airflow adjustment ability, a damper need to be incorporated into the exhaust piping system.
An air reducing kit: 472997901 (damper) is available as an accessory to be ordered, or you can use a local resource
damper.
If necessary, install the air reducing kit to the machine according to its instruction and then adjust the air flow/static
back pressure according to the following instructions.
Note!
For stack dryer, the static back pressure value must be measured in NTC position of bottom pocket only, in a
cold empty machine and running a program with NO heat on both pockets at the same time.
Note!
Only on machines with 3–phase power supply, ensure that the direction of the fan wheel is correct.
If the direction is wrong, swap two of the three phases on the connection terminal.
• Demount the heating sensor (NTC sensor) (A) of the bottom pocket and insert the measuring device. Make sure
the connection is tight to prevent air leakage.
• Connect the power to the machine according to "Electrical connection" section.
• Measure with a pressure measuring instrument (manometer), in cold empty machine and running a program with
NO heat on both pockets at the same time.
A
fig.X04602
Bekijk gratis de handleiding van Electrolux DE-650S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | DE-650S |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3663 MB |
