Electrolux DC6-4 handleiding
Handleiding
Je bekijkt pagina 16 van 24
16
Installation manual
Lift up the door a bit from the bottom edge and remove it from the upper hinged joint, far enough so that the hinge pin
is exposed. The pin has a groove for the control cable.
Pull the door cable (F) with its connecting contact out of the slot in the hinge. The door cable is bared so that it can
be pulled through the slot. Use this part when pulling the cable out.
The door (G) is now free and can be put aside.
Detach the upper hinge (H) with the hinge plate (I). Discard the hinge and plate.
Fit the new replacement hinge with hinge plate on the opposite side. (The hinge and hinge plate must be ordered
from the supplier).
F
H
G
I
fig.W01256
Remove the fan unit (J). The torque screws are located on the interior surface on the top of the drying cabinet. The
screws will become accessible if the hanger section is pulled out a bit.
J
fig.W01257
Bekijk gratis de handleiding van Electrolux DC6-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | DC6-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1468 MB |
