Electro-Voice EVI-AC handleiding
Handleiding
Je bekijkt pagina 23 van 44
EVA Expandable Vertical Array Rigging system | en 23
Electro-Voice
Installation manual
2023-01 | 04 | F01U196199
To attach the tie plates:
4 Use the supplied M10 bolts.
A B C D
E
Figure7.2: Grid assembly detail
A Spreader bar
B Grid side arm
C Nylon washer
D M10 shoulder bolt
E EVA module
To assemble the grid:
1. Attach the spreader bar with the supplied M10 shoulder bolts and nylon washers.
2. Attach the grid side arms with the M10 bolts supplied.
The majority of EVA applications come with full-range arrays of three or four modules.
It is possible to suspend up to eight EVA-2082S and/or EVA-1151D (discontinued) modules
together, with up to a combined maximum loudspeaker column weight of 720lb (327kg).
When using EVA-2151D subwoofers, the combined maximum loudspeaker column weight is
840lb (381kg), or five EVA-2082S modules under two EVA-2151D modules. Subwoofers are
installed at the top of the array.
7.2 Deciding which grid configuration to use with an array
7.2.1 Standard grid with or without second spreader bar
The EVA-SG2 standard grid is appropriate for the majority of applications covered by a three-
to four-module full-range array.
EVA-SG2 parts included
Quantity Component
1 Spreader bar
2 Side arm
2 Shoulder bolt
2 Nylon washer
The spreader bar and the two side arms assemble into a grid using the two shoulder bolts and
nylon washers.
Bekijk gratis de handleiding van Electro-Voice EVI-AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro-Voice |
| Model | EVI-AC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3734 MB |
