Electro Harmonix 8-Step Program handleiding
Handleiding
Je bekijkt pagina 17 van 25
24
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card
within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to
defects in materials or workmanship for a period of one year from date of purchase. This applies only to original
purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will
then be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate office listed
below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty
repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization
Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written
description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of
your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws
of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
- FCC COMPLIANCE -
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. If the device is not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications and void the user's authority to guarantee the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under
FCC rules.
17
All user parameters are saved in presets, including the position of the expression pedal at
the time you save. Two parameters that are not saved into the presets are the MIDI Clock
tempo and the MIDI Channel. It is not possible for the 8-STEP to save the MIDI Clock setting
though it will save the chosen TAP DIVIDE setting. If you load a preset that was saved while
syncing to MIDI Clock all parameters will be restored, simply connect the MIDI master to the
8-STEP and start the master clock. The 8-STEP will respond as it did when you saved the
preset.
LOADING PRESETS
When a preset is loaded, the decimal LED on the display lights up solid. If no preset is loaded,
the decimal LED will be off. If you change a parameter after loading a preset, the decimal
LED blinks to indicate a preset is loaded but has been modified since it was loaded. Return
the parameter to its setting in the preset and the decimal LED stops blinking.
PRESET CUE
If you load a preset while the 8-STEP’s sequencer is running, the presets do not load
immediately, instead the preset is cued up and waits until the current sequence comes to an
end at which point the new preset is loaded without missing a beat. During the time the
preset is cued, its digit will blink rapidly on the display.
If you would like to bypass the Preset Cue press the RESET FSW after loading the preset into
the Preset Cue. Presets load immediately if the sequence is paused.
LOADING PRESETS ON 8-STEP MAIN UNIT
1.
Enter Preset mode by pressing and holding the MODE knob until you see a
P
flash
on the digit display. Now release the knob.
2.
As long as the Foot Controller is not attached, you will see a number on the display.
This number represents the preset. If the Foot Controller is attached, an
F
is
displayed.
3.
Turn the MODE knob to change the number.
4.
Press and release the MODE knob to load the preset. If the sequencer is running,
the preset will be put in the Preset Cue and the number will blink rapidly on the
display. If the sequencer is stopped, the preset loads immediately.
5.
If you turn the MODE knob while a preset is loaded, the number in the display
blinks to indicate that the preset number currently displayed is not the preset that
is actually loaded.
6.
You can load a different preset by pressing and releasing the MODE knob again.
The new preset will be cued, awaiting the current sequence to finish.
7.
To unload a preset, press and release the MODE encoder.
8.
To exit Preset Mode, turn the MODE knob clockwise until an
E
is displayed. Press
and release the MODE knob to exit.
Bekijk gratis de handleiding van Electro Harmonix 8-Step Program, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro Harmonix |
| Model | 8-Step Program |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2757 MB |