Handleiding
Je bekijkt pagina 7 van 30
Page 7 of 30
INSTALLATION OF THE HEATING ELEMENT
IMPORTANT: Before drilling, ensure that no wires or pipelines are behind the wall to prevent
damage.
On the unit, you will find a sticker indicating the direction to insert the heating
element.
The heating element MUST be positioned at the base of the unit during
operation.
IMPORTANT: This heater is heavy. Two people are recommended for installation.
First ensure that you have all the correct parts needed for installation of the heating
element:
• Heating Element
• PTFE Tape
• Spanner
• The heating element is designed to be fitted into the bottom of the unit and can be
fitted into either the left or right port. Before installing, decide on the location where
your heater will be mounted, take care to ensure that the element will be accessible and
that the power cord can reach a suitable socket when your heater is mounted to the
wall.
• Wrap a few layers of the provided PTFE tape around the thread of the heating element,
ensuring the full thread is covered.
• Then carefully turn the heater so that the port you have chosen for installation is facing
upwards. This allows for easy installation of the element and prevents the possible
glycol from leaking while the port is open.
• Remove the locking nut from the port using the provided spanner and keep safe for
future installation.
• Gently insert the element into the port and screw into place. Ensure that the control panel
is facing the front of the unit before installing onto the wall.
Thread
Bekijk gratis de handleiding van ElectriQ VSTR9-650-0.6BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VSTR9-650-0.6BW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 7590 MB |
