Handleiding
Je bekijkt pagina 8 van 30

Page 8 of 30
WALL MOUNTING
NOTE: Depending on your wall type alternative fixings may be required to secure the
heater to your wall. If in any doubt advice should be sought from a competant person.
Step 1
Measure the distance between the four hanging holes on the back of the heater
(vertically and horizontally). Make a note of the measurement, and mark four
points on the wall that distance apart. Use a spirit level to ensure that they are
level.
Step 2
Drill 4 holes into the wall where
you have marked using a Ø10mm
drill bit and insert the wall plugs
provided. Secure the wall brackets
to the wall using the screws and
metal washers provided.
Ensure that the brackets are
secure and that the screw holes
are facing downwards before
commencing onto the next step.
Step 3
Fix the four wall bracket inserts
onto the back of the heater using
the screws provided. Ensure that
the screw holes on the brackets
are facing down.
Step 4
With two people, carefully hang
the heater onto the wall brackets
by inserting the inner wall
brackets into the wall brackets.
You can now secure the inner wall
bracket to the wall bracket using
the screws in the outer bracket.
Bekijk gratis de handleiding van ElectriQ VSTR9-650-0.6BSW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | ElectriQ |
Model | VSTR9-650-0.6BSW |
Categorie | Heater |
Taal | Nederlands |
Grootte | 2747 MB |