Handleiding
Je bekijkt pagina 13 van 30
Page 13 of 30
PROGRAMMING THE TIMER
Although for ease of use, we do advise for the timer to be set up through the app, it is also
possible to program the 7 day timer using the control panel on the unit. The weekly timer allows
the operation for each day to be set independently.
To enter the programming mode for the timer, the appliance must first be changed into WEEKLY
TIMER mode using the MODE button. Although the unit will automatically set the time when
connected to the internet, the date and time must be confirmed before adjusting the timer. To
adjust the timer follow the steps below ( We would advise that these are read prior to making
adjustments to familiarise yourself with the process)
CONFIRMING THE TIME
When the unit is powered on, press the MODE button until
the unit enters WEEKLY TIMER mode. Then, press and hold
the MODE button for 3 seconds to adjust the time. Use the
INCREASE and DECREASE buttons to adjust the hour value
between 0-23 hours. Press the mode button to confirm the
hour value.
The minute value will start to flash. Use the INCREASE and
DECREASE buttons to adjust the minutes value if required
between 0 and 59. Press the mode button to confirm the
minute value.
The day value will start to flash ( 1 – Monday to 7 –
Sunday) . Use the INCREASE and DECREASE buttons to
adjust the current day. Press the MODE button again to
finalise setting the time. You are now ready to adjust the
timer.
Bekijk gratis de handleiding van ElectriQ VSTR9-650-0.6BSW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VSTR9-650-0.6BSW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2747 MB |
