Handleiding
Je bekijkt pagina 19 van 31
Page 19 of 31
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the WiFi turned on
within the additional settings. Also ensure your phone is connected to the WiFi network. (We
advise turning mobile data off during setup).
1. Open app and enter the
home screen. Turn the unit
on and on the app, press
add device or the + in the
top right corner.
2. Select the type of device
as “Heater (Wi-Fi)” within the
“Small Home Appliance” tab.
4. Ensure that the unit is still in
connection mode, if not restart
connection mode by holding
the MODE button for 5
seconds. Then press the
orange button on the app.
5. Select the option for “Blink
Slowly”
6. Go to network settings in your
phone and connect to the
“SmartLife xxx” connection.
There is no password to
enter. Then return back to the
app to complete setup.
This will then transfer the settings to the heater.
Once the connection process has completed, go back to the network settings on your phone to ensure
your phone has reconnected to your WiFi router.
3. Select your WiFi network
and enter your WiFi password,
this is usually found on the
back of your router. I
Bekijk gratis de handleiding van ElectriQ VSM6-1800-1.2LGW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VSM6-1800-1.2LGW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2837 MB |
