Handleiding
Je bekijkt pagina 5 van 23
Page 5 of 23
• Avoid keeping the unit in direct sunlight for a long period of time.
• The heater is designed to be used at temperatures above -20°C. If it is exposed to
temperatures below this, it must be allowed to warm above this level before operation.
• Do not attempt to repair, disassemble or modify the appliance. This unit contains no user-
serviceable parts.
• Always unplug or disconnect the appliance from the mains power supply when not in use,
or when moving or cleaning it. Do not pull the cord to unplug the heater.
• Keep the heater clean. Do not allow any object to enter the ventilation or exhaust opening
as this may cause electric shock, fire, or damage to the heater.
• Do not use the appliance for anything other than its intended use. It is designed for
domestic indoor use only.
• There may be a trace of odour during the first few minutes of initial use, or after a period
of storage. This is normal and will quickly disappear.
• This appliance has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline, paint, or any flammable liquids are used or stored.
• Never locate this appliance where it may fall into a bathtub or otherwise become exposed
to water.
• This appliance is IP24 rated, and so can be used or installed within a bathroom as long as
the appliance and its cables are not within Zones 0-2.
• If used within a bathroom, the circuit must be protected by a suitable RCD to prevent
electric shock.
• Do not allow the appliance to be submerged or sprayed with water.
• The appliance must be installed in accordance with current regulations for the area of
installation. If unsure, professional advice should be sought.
• If electrical work is carried out within the bathroom which involves addition or alteration
of existing circuits, it may be notifiable to your local building control department (Part P).
If unsure, professional advice should be sought.
• WARNING: To reduce the risk of fire or electrical shock, DO NOT use this appliance with
any solid-state Speed Control Device or any variable speed controllers.
• The remote contains a lithium battery, keep out of reach of small children. Seek medical
advice if swallowed.
• To prevent battery leakage: Remove the battery from the remote if exhausted or before
long periods of storage.
• It is the installers responsibility to ensure that the wall plugs and screws provided are
suitable for the type of wall, alternative fittings can be used if required.
ENERGY SAVING AND UNIT SAFETY PROTECTION TIP
• Do not cover or restrict the airflow. Do not use in a dusty environment.
Bekijk gratis de handleiding van ElectriQ VG2TR-1.2BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VG2TR-1.2BW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2153 MB |
