Handleiding
Je bekijkt pagina 8 van 31
Page 8 of 31
WALL MOUNTING
NOTE: Depending on your wall type alternative fixings may be required to secure the
heater to your wall. If in any doubt advice should be sought from a competant person.
Step
1
Measure the distance between the two columns that you will be hanging your
heater from on the top of the heater and the two ends on the bottom of the rail.
Then measure the distance vertically between the top and bottom holes. Make a
note of the measurement, and mark four points on the wall that distance apart.
Use a spirit level to ensure that they are level.
Step
2
Drill 4 holes into the
wall in the positions
marked using a
Ø10mm drill bit and
insert the wall plugs
provided. Secure
the brackets to the
wall using the
screws and washers
provided with the
grooves all facing
upward, then insert
the bracket covers
onto the grooves.
Ensure that the
brackets are secure
before commencing
onto the next step.
Step
3
Carefully hang the radiator onto the brackets. It is highly recommended that two
people perform this step, due to the weight of the radiator.
Bekijk gratis de handleiding van ElectriQ VD4-1600-1.2DGW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | VD4-1600-1.2DGW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2837 MB |
