ElectriQ STRV-Z1-WH handleiding
Handleiding
Je bekijkt pagina 5 van 20
5
VALVE ADAPTER INSTALLATION
If your connector type is not M30 x 1.5, you will need to mount the adapter on the valve. Adapter
sets and their corresponding installation can be found in the diagrams below:
Danfoss RA valves
Danfoss RAV valves
Danfoss RAVL valves
Caleffi valves
Giacomini valves
M28 valves
BATTERY INSTALLATION
• To minimize the need for frequent battery changes, use only long-life, high-quality 1.5V
alkaline AA batteries.
• Rechargeable batteries are not recommended.
• Insert batteries with the correct polarity (+/-) as indicated inside the battery compartment.
• Do not mix old and new batteries or different battery brands.
• Check and change the batteries each autumn to ensure uninterrupted operation during
autumn and winter.
• Replace all three batteries simultaneously to ensure consistent performance.
Press down on the battery
compartment lock and gently
pull the cover outward to
remove it.
Insert three LR6 AA batteries
into the slots, ensuring they
are aligned correctly with the
indicated polarities (+/-).
Reattach the battery cover
and press it firmly into place
until the lock clicks securely.
Ensure the lock is properly
aligned in its original position.
Bekijk gratis de handleiding van ElectriQ STRV-Z1-WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | STRV-Z1-WH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4630 MB |
