ElectriQ STRV-Z1-AG handleiding

20 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 20
18
CLEANING AND MAINTENANCE
IMPORTANT: Turn off the radiator before cleaning the valve.
Clean the exterior with a dry or slightly damp cloth. Do not use abrasive materials or
solvents or immerse the device in water.
Periodically check for signs of damage or wear. Replace the device if its performance is
compromised.
Do not clean the unit by spraying it or immersing it in water.
Remove the batteries when not in use, as this can prevent leakages and prolong battery
life.
TROUBLESHOOTING
You may try to solve the following simple problems by yourself.
If they cannot be solved, please get in touch with the after-sales department.
Not powering on Try replacing the batteries.
Not connecting to the app.
Ensure the valve is within range of the wi-fi.
Check whether this is connected to the 2.4 GHz Wi-Fi network.
Restart the valve and router.
Follow the pairing steps again.
Battery draining quickly
Use high-quality alkaline batteries.
Adjust the settings to reduce unnecessary adjustments.
Temperature readings are
inaccurate.
Ensure the valve is not near heat sources such as direct sunlight or
electronics.
Recalibrate the temperature sensor in the app settings.
The valve makes unusual
noises.
Remove the valve and inspect for any dirt or debris.
Reattach it securely and ensure proper alignment.
Do not alter, disassemble, or attempt to modify the smart valves in any way. Any changes to
the unit may void the warranty and could result in a safety hazard.
Do not attempt to repair or modify the valves yourself. In case of a malfunction, contact a
qualified service professional.

Bekijk gratis de handleiding van ElectriQ STRV-Z1-AG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkElectriQ
ModelSTRV-Z1-AG
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4630 MB