Handleiding
Je bekijkt pagina 12 van 31
12
Press to enter sleep mode. The sleep indicator will be illuminated, and all other indicators will
be turned off. In sleep mode, the appliance works at low fan speed. Press SLEEP again to exit
sleep mode.
The timer functions cannot be combined or repeated.
POWER ON TIMER
With the appliance on standby, press the TIMER button to set the power-on timer. Use the +
and - buttons to adjust the timer's duration (1 to 24 hours). The Timer indicator will turn on, and
the unit will start after the selected number of hours.
POWER OFF TIMER
Press the TIMER button to set the power-off timer so the appliance runs with the desired
settings. Use the + and - buttons to adjust the timer's duration (1 to 24 hours). The timer
indicator will illuminate, and the unit will stop after a selected number of hours.
Used the + and – buttons to adjust the temperature in COOL and SMART COOL mode. They are
also used to set the duration of the TIMER. The buttons are not used in FAN or DRY modes.
Press both buttons together to change between displaying the temperature in Celsius and
Fahrenheit.
Use to enable the swing function.
Press SWING to activate and deactivate the up-down swing.
Press and hold SWING for 3 seconds to activate and deactivate the left-right swing.
The SMOOTH AIR function is designed to provide smooth, soft airflow while ensuring quiet
operation with the low fan speed. It provides a gentle refreshing breeze by utilising the small
holes within the louvre to distribute the air.
Press the SMOOTH AIR button to activate and deactivate the function.
When it is activated, both the up-down & left-right louvre will be fully open. The position of the
left-right louvre can be adjusted using the SWING button.
Pump
When the internal water tank is full, the unit will stop working.
Connect the drainage hose and place the other end into a bucket. Press and hold the SMOOTH
AIR button to start the pump function. This function can only be activated when the water tank is
full (E4 will be displayed).
Note: The pump is designed to make emptying the appliance easier, and is intended for purposes
such as draining into a bucket situated next to the unit. For longer distances, or greater heights an
external uplift pump should be used.
SMART COOL
When you turn on the smart, cool function, the unit will select the correct fan speed depending on the
dierence in your desired temperature and the current temperature. If the dierence is more than 2 degrees,
the unit will use the max fan speed; if it is less than this, it will use level F3.
Every 20 minutes, the unit will read the room temperature and adjust the fan accordingly. If the fan is already set to
the max or minimum speed, this may not change.
Bekijk gratis de handleiding van ElectriQ SC16HPW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | SC16HPW |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2818 MB |
