Handleiding
Je bekijkt pagina 9 van 15
Page 9 of 15
OPERATION AND SETTINGS
CONTROL PANEL & FUNCTION
POWER BUTTON
Press to turn unit “ON” or “OFF”
MODE BUTTON
Pressing this button will select between the COOL, DRY (dehumidify) and FAN modes.
The lights next to the button indicate the currently running mode.
COOL MODE: Cold air will be expelled through the front of the unit and hot air will be expelled
through the vent hose.
DRY (DEHUMIDIFIER) MODE: The unit should be set up without a vent hose, moisture is
extracted from the air that passes through the unit. Continuous drainage should be set up for
the moisture collected (Drainage pipe not included).
FAN MODE: No cooling effect, circulates air within the room, vent pipe not required.
UP & DOWN BUTTONS
During cooling function – These buttons raise or lower the temperature by 1
o
C for each
press. The minimum temperature is 16
o
C and max. 31
o
C.
SPEED BUTTON
Press to select either LOW or HIGH fan speed. The lights next to the button will indicate
the fan speed currently selected.
NOTE: In dehumidifying function, this button is invalid as the unit is designed to run at low
speed in dehumidifying mode.
Bekijk gratis de handleiding van ElectriQ P12C-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | P12C-V2 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 822 MB |
