Handleiding
Je bekijkt pagina 11 van 37
HOW TO OPERATE YOUR AIR CONDITIONER
11
THE DISPLAY
SETTING UP THE REMOTE
Insert 2 x AAA batteries into the rear of the remote control.
When batteries are first inserted or following changing the
batteries, the remote must be set up for the type of air
conditioner, either COOLING AND HEATING or COOLING ONLY.
As soon as the batteries are inserted, press and hold the MODE
button on the remote until the correct icon is displayed:
COOLING ONLY
HEATING AND COOLING
If COOLING ONLY is selected, the Heating mode will be deactivated.
If the remote is set up for the wrong type of unit, simply remove the batteries and reinsert, before
following the step above.
The remote control has a range of up to 8m. Point the remote control at the receiver in the interior unit.
A beep confirms that the remote-control signal has been received.
MANUAL SWITCH
Can be used to turn the air conditioner on and off
RUNNING LIGHT
Will illuminate when the cassette unit is operating
TIMER LIGHT
Will illuminate when the timer is set
WARNING LIGHT
Will illuminate when an error is detected
PRE-HEAT/DEFROST LIGHT
Will illuminate when the indoor unit is heating the coils,
before warm air is expelled in heating mode, or to prevent
frost in cooling mode.
Bekijk gratis de handleiding van ElectriQ Iqool-SRC36HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | Iqool-SRC36HP |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3393 MB |
