ElectriQ iQool-4MS12K12K12K12K handleiding

Airco

ElectriQ

37 pagina's

PDF beschikbaar

Handleiding

SETTING UP THE WiFi APP

CONNECTION METHODS AVAILABLE FOR SETUP

The air conditioner has two different setup modes, Quick Connection and AP (Access Point). The quick

connection is a quick and simple way to set the unit up. The AP connection uses a direct local WiFi

connection between your phone and the air conditioner to upload the network details.

Please ensure your device is in the correct WIFI connection mode for the connection type you are

attempting, the flashing of the WIFI light on your air conditioner will indicate this.

CONNECTION TYPE

DISPLAY OF INDOOR UNIT SHOWS

Quick Connection

AP (Access Point)

RESETTING THE WiFi CONNECTION ON THE INDOOR UNIT

There are 3 different methods for resetting the WiFi module on the indoor unit, which can be done using

your mobile phone:

Method 1

Press the DISPLAY button 6 times within 8 seconds.

Method 2

Press the ECO button 6 times within 8 seconds.

Method 3

Press and hold the MODE and buttons for 3 seconds.

Once the above has been followed, it will bleep 3 times, you should allow upto 10 seconds for the

connection mode to be displayed on the indoor unit before continuing connection.

If no connection is made within 2 hours, the WiFi will automatically turn off, and the connection should

be reset following the steps above to reactivate the function.

Please note: Each indoor unit is classed as a separate device within the app and as such the

connection process should be repeated for each indoor unit.

CHANGING BETWEEN CONNECTION TYPES

Changing the air conditioner between the two WiFi connection modes is exactly the same process as