Handleiding
Je bekijkt pagina 23 van 37
SETTING UP THE WiFi APP
23
CONNECTING USING ACCESS POINT (AP) MODE
Before initiating the connection, make sure the unit is in standby mode, with the display on the indoor unit
showing AP. If not follow the instructions for changing the connection mode. You should also ensure your phone
is connected to the WiFi network. (We advise turning mobile data off during setup)
1
Press on Add Device, or the +
in the top right corner.
2
Press the Large Home
Appliances tab on the left
3
Press on Air Conditioner
(WiFi)
4
Ensure your WiFi network is
shown before entering your
password*, and pressing
Next.
5
As you have already prepared
your air conditioner, Press
Next on the screens asking to
reset the device. Then select
Blink Quickly.
6
Use the Go to connect button
to leave the app, and connect
your phone to the WiFi
hotspot created by the air
6
Return to the app and it will attempt to connect your air conditioner to the internet.
7
Once successfully added the app will take you to the device screen.
If connection fails, retry connection using the Access Point (AP) mode, or alternatively follow the Quick
Connection (CF) mode connection method.
* Passwords are case sensitive, and often on a
label attached to your router.
Instructions are for guidance only, due to
continual development of the app, the process
may differ from the above.
Bekijk gratis de handleiding van ElectriQ iQool 3MS9K9K9K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | iQool 3MS9K9K9K |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7689 MB |
