Handleiding
Je bekijkt pagina 16 van 20
16
CLEANING AND STORAGE
ATTENTION: Please shut off the unit and unplug from the mains before cleaning or
performing maintenance.
CLEANING THE SURFACE
• Clean the heater with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage. Make sure no water enters the control panel or gaps in the casing.
• Do not run the unit until completely dry.
• Place the heater in its original box or cover to protect it from dust when not in use.
• Store it in a cool, dry place.
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
Do not repair or disassemble the unit yourself. Unauthorised repair attempts will invalidate the
warranty and may cause bodily harm.
Issue
Possible Reason
Solution
No power
1. The power cord is unconnected
2. There is no power from the socket
3. The power switch on the rear of the unit
is turned off.
1. Connect the power cord
2. Check socket is turned on
3. Ensure the power switch on
the rear of the unit is in the on
position
Odour
emission
from the
unit
1. New unit. When the unit is used for the
first time, the fan motor may produce an
odour which will dissipate within a week of
use
1. No action required
Strong
vibrations
and noise
1. The unit is not placed on a flat surface
2. The unit may be damaged
1. Place on a flat surface. May
put an anti-vibration mat
underneath
2. If the heater is damaged,
discontinue use and contact the
service centre.
Model
ELPH750LEDWW
Voltage
220-240V~
Frequency
50-60Hz
Power
750W
IP Waterproof
IP24
Recommend heating area
≤ 15m2
Bekijk gratis de handleiding van ElectriQ ELPH750LEDWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | ELPH750LEDWW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1533 MB |
