Handleiding
Je bekijkt pagina 7 van 19
7
INSTALLATION
• The dryer must be installed in a clean dry place. Air must be able to circulate freely
around the appliance.
• Do not obstruct the front air inlet or the air inlet grilles at the back of the machine.
• The dryer should be placed on a firm level surface to avoid unwanted noise and
improve performance.
• The feet must never be removed.
• Once the dryer is in its permanent position check that the dryer is level with the aid
of a spirit level. If not, adjust the feet with a screwdriver.
• Ensure that the voltage of the power supply is the same as the electrical
specifications of the appliance.
• A minimum of clearance of 25mm at the top, 20mm at the sides and 50 mm at the
back of the unit must be allowed.
• Please install the dryer in a working environment between 5⁰C - 35⁰C.
• Do not place the dyer next to other items such as an oven or refrigerator.
DRAIN PIPE INSTALLATION
If you are stacking your dryer, or do not wish to use the water box, you can install to
a drainage pipe (included) to remove water from the unit.
1. Remove the connecting pipe at the rear of the water box and install the
drainage pipe. Ensure that it is securely connected.
2. Without twisting of crimping the pipe, insert the other end into a suitable
drainage system. Ensure that the pipe is not higher than the dryer, or the
water will not drain.
Bekijk gratis de handleiding van ElectriQ eiQTDHPFS12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | eiQTDHPFS12 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3075 MB |
