ElectriQ eiQC77V3 handleiding

Handleiding

1234567891011121314151617181920212223/ 23

Afdrukken

Je bekijkt pagina 8 van 23

8

LOCATING THE FIXING BRACKETS

The unit should be placed on a stable, smooth surface (use the

packaging). Do not apply force onto the controls protruding from the

hob.

Fix the hob to the work surface by screwing the four brackets to the

underside of the hob as shown above.

CONNECTING THE HOB TO THE MAINS POWER SUPPLY

The power supply should be connected in compliance with the

relevant local regulations. The method of connection is shown

below.

If the cable is damaged or needs replacing, this should be done by

an after-sales technician using appropriate tools.

If the appliance is being connected directly to the mains supply, a

dual pole circuit breaker must be installed with a minimum gap of

3mm between the contacts.

The installer must ensure that the correct electrical connection has

been made and that it complies with safety regulations.

The cable must not be bent or compressed.

The cable must be checked regularly and only replaced by a

properly qualified person.

1234567891011121314151617181920212223/ 23

Bekijk gratis de handleiding van ElectriQ eiQC77V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Fornuis