Handleiding
Je bekijkt pagina 10 van 24
Page 10
Installation Procedure
1. Remove the sticker form the front panel.
2. Prepare the installation hole (slightly bigger than unit size for
ease of inserting unit).
3. Insert the air conditioner into the installation hole. Install at a
slight outward down angle to allow condensate water to drain
away (approximately 6 - 10mm, as figure on the right).
4. To avoid vibration and noise, make sure the unit is installed
securely.
5. Seal or fill gaps around the inside and outside to provide protection against water, draughts
and insects and satisfactory appearance.
6. Connect the air conditioner to the power ensuring any excess cord is positioned beneath
the base.
Installation Assistance
1. Use bracket support
• The installation hole should be strong enough to support the air conditioner. You can install
an outdoor bracket to support the unit (as figure on the bottom)
2. Use sunshade board
• You can install sunshade board on top of the air conditioner to avoid anything being
dropped into it and avoid direct sunshine. When installing the sunshade board, ensure the
air inlet at the side grille is not blocked.
Bekijk gratis de handleiding van ElectriQ eiq-WWU12K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | eiq-WWU12K |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 1999 MB |
