Handleiding
Je bekijkt pagina 7 van 22
7
ATTACHING THE STAND
Due to the heavy weight and dimensions of the screens and their fragile nature, we recommend
that they are unpacked and assembled by 2 people.
electriQ and its distributors and dealers are not liable or responsible for damage or injury
caused by improper installation, improper use or failure to observe these safety instructions. In
such cases any guarantee will be void.
The stand can be removed from the rear of the monitor by pressing the quick release button on
the rear of the monitor.
Keep the foam underneath the monitor before attaching the stand.
To avoid damage, do not touch the screen when moving the monitor.
1. Open the packaging, take out the monitor with foam still attached and gently place it on a
desk or table.
2. Take out the two main parts of the stand. Then use a screwdriver (not included) and bolts to
fasten base to the stem.
3. Align the stand stem bracket with the opening on the back of the monitor and carefully insert
the bracket. The pieces should click into place.
HOW TO REMOVE THE STAND
Before removing the stand, remove the port cover from the rear of monitor. Press the switch down
to release the monitor from the bracket. We would advise to lay the monitor in the polystyrene
packaging to protect the screen when removing the stand.
Bekijk gratis de handleiding van ElectriQ eiQ-495KCSUW240VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | eiQ-495KCSUW240VA |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2227 MB |
