Handleiding
Je bekijkt pagina 22 van 25
Page 22 of 25
MAINTENANCE
CLEANING AND STORAGE
ATTENTION: Please shut off the unit and unplug from the mains before cleaning or
performing any maintenance.
Cleaning the surface
• Clean the heater with a duster or a soft wet cloth.
• Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage. Make sure no water enters the control panel or gaps in the casing.
• Do not run the unit until completely dry.
• Place the heater in its original box or cover to protect it from dust when not in use.
• Store it in a cool, dry place.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself; unauthorized repair attempts will invalidate
the warranty and may cause bodily harm.
Issue
Possible Reason
Solution
No power
1. The power cord is unconnected
2. There is no power from the socket
3. The power switch on the rear of the
unit is turned off.
1. Connect the power cord
2. Check socket is turned on
3. Ensure the power switch on the
rear of the unit is in the on position
Odour
emission
from the
unit
1. New unit. When the unit is used for
the first time, the fan motor may
produce an odour which will dissipate
within a week of use
1. No action required
Strong
vibrations
and noise
1. The Unit is not placed on a flat
surface
2. The unit may be damaged
1. Place on a flat surface. May put
an anti-vibration mat underneath
2. If the heater is damaged,
discontinue use and contact the
service centre.
If the above solutions do not resolve the problem, please contact the service centre.
Bekijk gratis de handleiding van ElectriQ EGH20AW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | EGH20AW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2074 MB |
