Handleiding
Je bekijkt pagina 20 van 25
Page 20 of 25
AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered
by the Time and a range of other influences, depending on what other TUYA-enabled
devices you have on the network.
1. Press on the Scene tab at
the bottom of the Home
screen.
2. Press on the Automation
tab at the top of the
screen.
3. Press on the + at the top
of the screen or press on
Add Automatic Action.
4. Setup is very similar to the
scene setup on the previous page,
and includes an extra section for
specifying a trigger for the scene
to start.
Press the Pen next to “Please
Enter Scene Name” to input the
name for your Scene
Press the Red Plus next to “When
any condition is satisfied” to add
the trigger
Press the Red Plus next to
“Execute following actions” to add
the action required. Then select
the heater from the list of devices.
6. Chose the function,
set the value for the
function, and then
press the back button
in the top right corner,
to return to the
previous screen.
5. Select the condition when
the automation should start.
A number of triggers can be
combined.
7. Once all the functions required have been
added, press the Save button in the top right
corner to finalize and save your new scene.
The automation is now set up; it can be turned
on and off using the toggle on the home page.
Bekijk gratis de handleiding van ElectriQ EGH20AW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | EGH20AW |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2074 MB |
