Elco VARION C-POWER handleiding
Handleiding
Je bekijkt pagina 34 van 44
34 | ELCO GmbH
Service repairs
Operation manual 50.0 | Status 10.2021
9. Service repairs
9.1 Maintenance
D WARNING!
Risk of injuries caused by faulty safety
components!
This chapter contains important information regarding
the safe maintenance of the system. Important safety
components may fail or become faulty as a result of
insufficient maintenance.
A Read this chapter carefully before performing
maintenance work.
A Wait for the system to cool down before carrying out
maintenance.
A Perform the maintenance according to the specified
intervals.
Maintenance work must only be performed by trained
personnel.
Electrical work must only be performed by qualified,
skilled electricians.
D
“2.2.3 Trained personnel” (page 6).
The system will indicate the pending maintenance 300
hours before the maintenance interval expires.
If the maintenance is not performed, the system will run
for another 200 hours at minimum capacity after the
interval has expired.
After the 200 hours have passed, the system will
switch off.
The system can only be put back into operation once
the maintenance has been performed.
The maintenance must be performed and documented
according to the points in the maintenance log.
Maintenance plan.
Specific tasks for maintaining the system are only
performed by the manufacturer.
D
“2.2.1 Manufacturer” (page 6).
In the case of specific tasks for maintaining the system:
A Contact the manufacturer.
Maintenance manual.
9.2 Fault resolution
D WARNING!
Hazard caused by failing to observe the error
messages!
Malfunctions indicate faults with the system or incorrect
settings in the control mechanism. Malfunctions must
be rectified immediately to prevent further subsequent
damage.
A Rectify all faults immediately.
System malfunctions are displayed by the control
mechanism in the operational display.
“ELCO/Control” operating manual.
In the case of malfunctions that cannot be resolved
using the control mechanism:
A Initiate remote maintenance.
A Follow the manufacturer’s instructions.
Bekijk gratis de handleiding van Elco VARION C-POWER, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elco |
| Model | VARION C-POWER |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5865 MB |
