Handleiding
Je bekijkt pagina 12 van 60
1212
FEEDER CABLE SECTION
Type “H05RR-F”
220-240 Vac 3 x 2,5 mm
2
(*) (**)
(*) Connection possible with plug and outlet
(**) Connection with wall box connection.
CONNECTION OF THE POWER SUPPLY CABLE
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
• Unhook the terminal board cover by inserting a screwdriver into the two hooks “A
”
(g.
2.1).
• Unscrew the screw “D” and open completely the cable clamp “E” (g. 2.2).
• Connect the phase, neutral and earth wires to terminal board “G” according to the
diagram in g. 2.3.
• Strain the feeder cable and block it with cable clamp “E” (by screwing screw “D”).
• Close the terminal block cover (check the two hooks “A” are correctly hooked).
IMPORTANT: To connect the power supply cable DO NOT unscrew the screws xing
the cover plate behind the terminal block.
NOTE: The earth conductor must be left about 3 cm longer than the others.
D
E
F
G
PE
N
L
Fig. 2.3
Fig. 2.2
220-240 V ac
A
Fig. 2.1
Bekijk gratis de handleiding van Elba Elio E93 MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elba |
| Model | Elio E93 MF |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 6181 MB |
