Handleiding
Je bekijkt pagina 15 van 56
1515
FEEDER CABLE SECTION
Type “H05RR-F”
220-240 Vac 3 x 1,5 mm
2
(*) (**)
(*) Connection possible with plug and outlet
(**) Connection with wall box connection.
CONNECTION OF THE POWER SUPPLY CABLE
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
• Unhook the terminal board cover by inserting a screwdriver into the two hooks “A
”
(g.
2.1).
• Unscrew the screw “D” and open completely the cable clamp “E” (g. 2.2).
• Connect the phase, neutral and earth wires to terminal board “G” according to the
diagram in g. 2.3.
• Strain the feeder cable and block it with cable clamp “E” (by screwing screw “D”).
• Close the terminal block cover (check the two hooks “A” are correctly hooked).
IMPORTANT: To connect the power supply cable DO NOT unscrew the screws xing
the cover plate behind the terminal block.
NOTE: The earth conductor must be left about 3 cm longer than the others.
The operations must be executed by a qualied technician.
D
E
F
G
PE
N
L
Fig. 2.3
Fig. 2.2
220-240 V ac
A
Fig. 2.1
Bekijk gratis de handleiding van Elba EEO-D5010BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elba |
| Model | EEO-D5010BK |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 5800 MB |
