Elation VOLT Q5 handleiding
Handleiding
Je bekijkt pagina 27 van 34
www.elationlighting.com
27 VOLT Q5™ User Manual ver 1
CLEARING EWDMX TRANSMITTER LINK
• Access the fixture’s main menu and toggle to the “PERSNAL” menu, then access
the “WDMX” sub menu and select “ClrWDMX” to clear any existing link between
the fixture and a EWDMX Transmitter. The EWDMX indictor on the fixture will turn
solid RED when the link is severed.
• You may also clear the link directly from the EWDMX Transmitter. First, be sure the
fixture(s) is powered ON, and then hold down the configuration button on the
WDMX Transmitter for as least 5 seconds. This will automatically clear the link
between the EWDMX Transmitter and any fixture that is powered ON. All EWDMX
indictors will glow solid RED if the procedure was successful.
EWDMX INDICATORS
RED/GREEN (Rapid Flashing) = Syncing to a EWDMX Transmitter
RED/GREEN (Slow Flashing) = Paired with a EWDMX Transmitter but not receiving
a DMX signal from a controller.
GREEN (Solid) = Paired with a EWDMX Transmitter and receiving DMX data
RED (Solid) = Not paired with a EWDMX Transmitter (FREE)
Bekijk gratis de handleiding van Elation VOLT Q5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | VOLT Q5 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5067 MB |
