Elation VOLT+ BAR S handleiding
Handleiding
Je bekijkt pagina 22 van 55
22
ARIA SETUP GUIDELINES
GENERAL INFORMATION
The Aria Bluetooth app has the ability to connect wirelessly to any device that has Aria wireless
DMX installed and has Bluetooth enabled.
Before installing the xture in a remote location, double check that the xture’s main power
is switched on, and that the Bluetooth function has been enabled in the xture’s system menu.
Certain xtures may have Bluetooth disabled by default. If this function is disabled, then the
xture cannot be congured remotely using the Aria app, and will have to be congured directly
from the xture’s control screen.
Additionally, the user should consider setting the xture’s No DMX setting to “Hold Last”. This will
allow the xture to continue running using the current settings, even if the Aria app device moves
out of range, the app is closed, or the signal is otherwise interrupted, minimizing disruption in the
operation of the xtures.
LEGACY DEVICES
Please note that legacy connected devices, such as those using Wiy, E-Fly, or Magy, are not
compatible with this app. For such legacy devices, the use of a bridge is recommended, as the
bridge can communicate with these devices via its SM220 protocol.
The Aria X2 BLE app is currently available from the Apple app store.
FIXTURE IDENTIFICATION
Aria compatible devices can be identied and connected via the Fixtures tab in the app. This tab
displays a eld of twenty-four buttons that can be assigned to Aria compatible devices that are
within range, and the buttons will automatically be assigned to devices in the order in which they
are discovered. If more than twenty-four units are within range, it may be necessary to use the
lter feature to search for the desired xture. Button location can be edited by selecting the
conguration key, then the user can drag and drop the buttons to the desired location and hit save
to keep changes. Once a device is known to the app, it can also be assigned to a particular button.
From that point forward, the assigned device will always be assigned to that button location.
IMPORTANT NOTE: For version 0.65 or higher, a shared system password is required to connect
to any device.
Unlike wireless DMX, Bluetooth is a connect rst protocol. To connect to a device or xture, tap
the assigned button in the Fixtures tab. If the connection is successful, a green frame will appear
around the button, indicating that the app was able to retrieve the current channel values from
the xture. The app must be connected to a xture in order to use its channel controls or view and
change settings. Please note that not all Aria devices have channel controls.
Additionally, each xture can only be connected to one device with the app at any given time. Once
a xture is connected to the app installed on one device, any other devices will be blocked from
connecting. As a result, when setting up a new xture for the rst time, best practice is to have
only a single user with the app open within range, in order to ensure that the xture pairs to the
intended user’s device.
Bekijk gratis de handleiding van Elation VOLT+ BAR S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | VOLT+ BAR S |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6258 MB |
