Elation Vision Scan 250 handleiding
Handleiding
Je bekijkt pagina 24 van 52
Vision Scan 250™
©Elation Professional® 24 Vision Scan 250™
5. Press MODE/ESC to return to the main menu.
AUTO
– Runs the unit without any DMX signal in stand-alone mode. Follow the procedure
below to enter the auto menu:
1. Access the main menu.
2. Tap the UP or DOWN button until “PLAY” is displayed, press ENTER.
3. Tap the UP or DOWN button until “AUTO” is displayed, press ENTER.
4. Tap the UP or DOWN button to select “OFF”, “RUN” or “AUDI” and press ENTER to
confirm.
5. Press MODE/ESC to return to the main menu.
4. LAMP MENU -
– This menu function will manually turn the lamp on and of f. Follow the procedure
below to enter the lamp menu:
1. Access the main menu.
2. Tap the UP button until“LAMP”is displayed, press ENTER.
3. The display will show“ON/OFF”.
4. Press the UP button to select “ON” to activate this function, or “OFF” to
deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
5. RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the Pan and Tilt motors.
COLR (Color) - Resets the color motors.
GOBO - Resets the gobo motors.
SHTR - Resets the shutter motors.
OTHR - Reset all other motors
Bekijk gratis de handleiding van Elation Vision Scan 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Vision Scan 250 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5353 MB |
