Elation UNI PAK II handleiding
Handleiding
Je bekijkt pagina 4 van 8
Features
1
Thank you for purchasing the Uni pak-II hybrid dimmer/switch pack.
This product includes the following features:
Every effort has been made to design dependable and reliable products. New
products are constantly being designed to meet the needs of the entertainment
lighting industry. Your comments regarding our products and services are welcome.
Please send us an e-mail to info@elationlighting.com and let us know how we
can improve to better serve you.
It’s both a privilege and a pleasure serving you.
1 channel hybrid pack with dual Edison output sockets.
Pack is user assignable between Dimmer & Switch modes.
10 Amp Maximum output.
On board control fader allows for dim intensity adjustment, from 0-100%.
External control fader allows for dim intensity adjustment, from 0-100%.
4 digit segment display shows current activity and function state.
3-pin standard DMX IN/OUT ports.
10
Installation / Mounting
The Uni pak-II was designed to be mounted on a truss rig or ceiling. It is
recommended that you use a suitable mounting clamp and safety cable when
mounting to any structure. There are two holes on the Uni pak-II. These are in
place for a mounting clamp or to fasten to a wall or ceiling. For cooling purposes,
it is necessary to mount the pack so that air is free to circulate around the dimmer.
There should be at least 12 inches of clearance between the pack and anything
surrounding it.
Connections
The Uni pak-II is supplied with a single 10 Amp Edison plug attached to a 16 gauge
line cord. This cord should be connected to a service capable of suppling
at least 10 amps and be protected by a properly sized circuit breaker. Lamp loads
should be plugged into to the dual 10 Amp Edison sockets which are supplied on
the face of the pack. 3 pin XLR’s are supplied for the input and output of the data
link. Connect out of the console or previous fixture in line and into the input of
the Uni pak-II. Connect out of the Uni pak-II and into the input of next pack or
fixture in line. It is recommended that the last pack or fixture in line include a DMX
terminator into the output. A DMX terminator consists of a 120 ohm, 1/4 watt
resistor soldered across pins2&3ofa3pinXLRconnector.
Installation, Mounting and Connections
Bekijk gratis de handleiding van Elation UNI PAK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | UNI PAK II |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 955 MB |
