Elation TVL2000 II handleiding
Handleiding
Je bekijkt pagina 4 van 10
©Elation Professionals® - www.elationlighting.com - TVL2000 II Instruction Manual Page 7
5-Pin XLR DMX Connectors.
Some manufactures use 5-pin XLR
connectors for DATA transmission in place of 3-pin. 5-pin XLR xtures
may be implemented in a 3-pin XLR DMX line. When inserting stan-
dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)
Pin 1
Pin 5 - Do Not Use
Pin 4 - Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion
TVL2000 II Set Up
TVL2000 II Installation
The unit should be mounted using a mounting clamp (not provided),
axing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is rmly xed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
©Elation Professionals® - www.elationlighting.com - TVL2000 II Instruction Manual Page 8
TVL2000 II Control Panel
1 Display: Shows the various menus and the selected functions
2 Indicator LED:
DMX On DMX input present
MASTER On Master Mode
SLAVE On Slave Mode
COLOR TEMP. On Max. power consumption of CW/WW
3 Button:
MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions
4 Color Temperature Adjustment: Adjust the color temperature from 3200k to 6500k, 25K
as a step. When the value is between 4825K and 4875K the green
LED indicator will light . It means the power consumption of
CW/WW color the maximum.
5 Dimmer Adjust knob: Adjust the intensity of the unit.
6 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
7 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
8 Mains output: Connect to supply main power for the next unit.
has
reached
Bekijk gratis de handleiding van Elation TVL2000 II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | TVL2000 II |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2085 MB |
