Elation TRIO 2496 handleiding
Handleiding
Je bekijkt pagina 29 van 51
Elation Professional® www.elationlighting.com - Trio-2496 - Page 28
-Use “>” to move the cursor to the parameters you want to modify.
-Use “Up” or “Down” to gradually set the corresponding value.
-Use “Flash Level Fader” to change the corresponding value rapidly.
-Choose “Enter” to save your settings and exit.
4.5.3 Using Groups
Your console is able to store up to 24 groups. If you have several fixtures of the same type, you often
want to select them all at the same time. To avoid excessive use of the Bump buttons, the console
allows you to put fixtures into groups.
Making a Group
Make a Group by following these steps:
-Select the Fixtures that you want to put into a group.
-Press the Menu button, then Press C to choose “Edit Group”
-Bump buttons 1-24 will indicate the recording state for the Group. Blue blinking keys indi-
cate the group is blank, a non blinking key indicates that the bump contains a group.
-The LCD prompts you with “Record Group Select a Bump as a Group”. Press any one of the
bumps (1-24) to store your group.
Selecting a group of Fixtures
Once you have created a Group, you can then quickly select all of the fixtures in the Group.
-In LED Mode, press A to highlight “Group”.
-Bump LED’s, with groups stored, will light in blue.
-Press the related bump button which contains the group that you want selected.
4.5.4 Delete
The console allows the user to delete the collocated LED fixture and Recorded chases.
Delete Fix
-In LED Menu Mode, choose Next and then choose Delete.
TRIO-2496 OPERATION - LED MODE
Bekijk gratis de handleiding van Elation TRIO 2496, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | TRIO 2496 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6045 MB |
