Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 44 van 48
Choose Fixtures
Press one of the F 1-6 buttons corresponding to the group numbers in the display to
select the group number when the Fixture button is pressed down. Next select several
equal fixtures, their LEDs will blink simultaneously indicating they are in the identical
group.
In Fixture mode, to recall a existed group, simply press the F button corresponding to the
group required.
To remove the fixtures from a group, you can press the Fixture 1-16 buttons required to
extinguish the LEDs when the group is active.
Utility Controls
Times
This function allows you to multiply the fade-in and fade-out speed set in Recording.
As a result, you can enhance or attenuate the speed for the presets being played.
In Fixture mode, a dialog box will appear and the Times LED will flicker briefly when
the Times button is pressed.
SELECT SHOW
esc
ok
*01* [ 25 ]
SPEED%
In this operating mode, select Show, Chase or Scene mode using the Show, Chase
or Scene button. As is explained hereinbefore, you can play 4 shows, 4 chase and 4
scenes at a time. The one with two star characters is ready to be set. Use the Cursor
LEFT/RIGHT buttons to pass from element to element, then use the F 5 fader or Cursor
UP/DOWN buttons to set the value for the current element. The speed multiplying factor
ranges between 25% and 400%. "Ok" confirms this setting and leaves this menu, and
"esc" leaves with the settings unchanged.
In this mode, you can direct access a certain step of the chase or show using the Flash
1-12 buttons in combination with the Flash Page button.
40
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
