Elation Stage Q handleiding
Handleiding
Je bekijkt pagina 14 van 48
Press right arrow button, a warning message appears, reminding you that every X or Y
channel be unique. "ok" confirms, a dialog box will appear.
In Create New Fixture menu, use Cursor UP/DOWN buttons or F5 fader to scroll to
[ PAN/TILT PATCH].
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]PAN/TILT PATCH
This menu allows you to assign patching to fixture's DMX channels.
Most fixtures allow both 8 and 16 bit control, some only 8 bit. In 16 bit mode, the Pan
movement requires two channels, so does the Tilt movement. In 8 bit mode, just one
channel is used for Pan or Tilt, so only high position is set. Use the Cursor UP/DOWN
buttons to set the value, LEFT/RIGHT to pass from effect to effect. You can also use
F1-F4 buttons to set the values.
Pan/Tilt function
X(PAN) Y(TILT) PAN/ TILT
H[ -- ]
In the case:
P1
COLOR GOBOS G. ROT PRISM SHUTT DIMMR
[ 5 ] 6 7 9 10 8
Pressing the right arrow Select button gives access to page 2 and the left arrow returns to
the previous menu. Storage is automatic.
Pan/ Tilt Patch
esc
ok
OUTPUT
L -- H -- L --
Pressing the right arrow Select button confirms your setting.
In Create New Fixture menu, use Cursor UP/DOWN buttons or F5 fader to scroll to
[ HARD/ SOFT CROSS].
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]HARD/SOFT CROSS
Hard/ Soft Patch
Setup Menu
10
Bekijk gratis de handleiding van Elation Stage Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Stage Q |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2570 MB |
