Elation Satura Spot LED PRO handleiding
Handleiding
Je bekijkt pagina 24 van 41
www.elationlighting.com
www.elationlighting.com
24 SATURA SPOT LED PRO™ User Manual Ver 1
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to
Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit.
If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.
To start an Auto Program proceed as follows:
1. Slave Setting
• Select “Function Mode”.
• Press ENTER to confirm.
• Select “Set to Slave”.
• Press ENTER to confirm.
• Select “Slave 1”, “Slave 2” or “Slave 3”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
• Select “Function Mode”.
• Press ENTER to confirm.
• Select “Auto Program”.
• Press ENTER to confirm.
• Select “Master” or “Alone”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
Bekijk gratis de handleiding van Elation Satura Spot LED PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Satura Spot LED PRO |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6527 MB |
