Elation Rayzor Q12 handleiding
Handleiding
Je bekijkt pagina 10 van 51
www.elationlighting.com!
10!!!!!!!!!!!!!!!!!!!!!!!!!RAYZOR'Q12™'User'Manual'1.0
1. LED Assembly – RGBW Quad LEDs comprise the LED assembly.
2. DC Switch – Controls menu and display power when disconnected from main power.
3. Microphone – Captures external low frequency sounds to trigger the unit in Sound
Active mode. Designed to capture low frequency sounds only, tapping on the
microphone and/or high-pitched sounds may not trigger unit.
4. LCD Menu Control Display – Full color LCD animated menu display.
5. MODE/ESC Button – Used to access the menu functions and exit the current command.
6. ENTER Button – Used to enter into or lock a certain menu function.
7. LEFT Button – Used to toggle through the menu display.
8. DOWN Button – Used to toggle down or back through the menu functions and settings.
9. UP Button – Used to toggle forward through the menu functions and settings.
10. RIGHT Button – Used to toggle through the menu display.
11. Power IN – Power connection (powerCon) to power source
12. Power OUT – Power connection (powerCon) to daisy chain to another unit.
13. Fuse Holder Assembly – Houses ST 250v T3.15a GMA safety fuse. Always replace
with an exact match unless otherwise specified by an authorized Elation Service
Technician. Using a fuse other than that specified could seriously damage the unit and
may void the manufactures warranty.
14. Power Switch – Used to power the unit ON or OFF.
15. 5-Pin DMX OUT – Sends incoming DMX signal to the next fixture in the DMX chain via a
female 5-pin XLR jack.
16. 5-Pin DMX IN – Accepts incoming DMX signal via a male 5-pin XLR jack.
Bekijk gratis de handleiding van Elation Rayzor Q12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Rayzor Q12 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 8517 MB |
