Elation Proteus Rayzor 760 OPS handleiding

Verlichting

Elation

55 pagina's

PDF beschikbaar

Handleiding

SAFETY GUIDELINES

• DO NOT TOUCH the 󱁕xture housing during operation. Turn OFF the power and allow

approximately 15 minutes for the 󱁕xture to cool down before servicing.

• DO NOT shake 󱁕xture, and avoid brute force when installing and/or operating 󱁕xture.

• DO NOT block any air ventilation slots.

• All fan and air inlets must remain clean and never blocked.

• Allow approx. 6” (15cm) between 󱁕xture and other devices or a wall for proper cooling.

• Always disconnect 󱁕xture from main power source before performing any type of service

and/or cleaning procedure.

• Only handle the power cord by the plug end. Never pull out the plug by tugging the wire

portion of the cord.

• During the initial operation of this 󱁕xture, a light smoke or smell may emit from the interior

of the 󱁕xture. This is a normal process and is caused by excess paint in the interior of the

casing burning o󱁔 from the heat associated with the lamp and will decrease gradually over

time.

• Consistent operational breaks will ensure 󱁕xture will function properly for many years.

• ONLY use the original packaging and materials to transport the 󱁕xture in for service.

• OPS 󱁕xtures are NOT designed for 24/7 operation, and require periodic cooling intervals

in high-heat environments. No more than 14 hours per day of operation should be allowed.

Bekijk gratis de handleiding van Elation Proteus Rayzor 760 OPS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.